-
Oval mahogany table
Second version of the oval table, this one is in Mahogany. Apron is brick laid and veneered. Bandings and paterae are all custom and built at the shopFinish is hash…
-
Cherry Chest on Chest
This is a simplfied Thomas Elf chest on chest. This was built in 2005. Cherry and figured Cherry for the drawer fronts. Poplar for secondary wood Finish is shellace and…
-
Walnut coffee table
Bookmatch walnut top, reversed tapered legs Finish Tung oil, additional coats of wipe on Varnish on top for better protection. Rubbered out top finish with Maguires to give nice medium…
-
Blanket chest
Cherry blanket chest made for my daughter , based on a 1760's 6 board chest Hand cut dovetail, molding on the sides of the top are sliding dovetails to allow…
-
additional views of maple box
Additional views of maple / walnut box
-
Tiger Maple / walnut keepsake box
Tiger Maple and walnut keepsake box Finish is oil with top coated with several coats of wipe on varnish, sanded lightly between coats. After the finish had cured used Maguire's swirl…
-
Federal style oval table
Construction- bricklaid apron, legs connected via bridle joint / sliding dovetail . Custom banding, holly and ebony, cuffs on legs are ebony and fiddleback mahogany, Oval Inlay curly maple/ black...
-
Cherry Side Table
Side table, Cherry , ebony, holly, fiddleback and Zebrawood inlay
-
Cherry side table
Cherry Side table
-
Writing desk
Writing desk for my daughter, Materials: Cherry, quilted maple and tiger striped mahogany inlay, holly and ebony banding and cuffs. Finish: Amber shellac, non-wax shellac sealer/ wipe on varnish
Discussion Forum
-
Sander launching my pad
I have a Bosch 5"inch orbital sander Model#3107 DVS. I foung it to be a real workhorse early on,but the I started having problems with the sanding pad , which…
-
Sander launching my pad
I have a Bosch 5"inch orbital sander Model#3107 DVS. I foung it to be a real workhorse early on,but the I started having problems with the sanding pad , which…