Ep 1: Machine Setup – Introduction
When a machine is tuned up and maintained properly, it will not only make your woodworking more accurate, but it will also make your time in the shop more enjoyable
When a machine is tuned up and maintained properly, it will not only make your woodworking more accurate, but it will also make your time in the shop more enjoyable. Both Matt Wajda and Ellen Kaspern have spent countless hours behind machines making furniture and they’ve also taught classes on setting up and maintaining machinery.
In this video workshop, Ellen will show you how to tune up your tablesaw: making the miter slots parallel to the blade, setting the fence parallel to the miter slots, setting the tabletop parallel to the angle of the blade, and finally lubricating all of the moving parts.
For the jointer, Matt will make sure the beds are coplanar, checking for wind and shimming if necessary. Then he’ll set the knives using the outfeed table as a reference, and set the depth of cut.
On the bandsaw, Ellen will make sure that the blade is tracking properly by setting the wheels coplanar to each other, crowning the tires, and setting the tilt and tension on the top wheel. Finally she’ll set the bearings and guide blocks.
On the planer, Matt will set the bed parallel to the cutterhead and set the knives. Then he’ll use a gauge block and a shim to set the cutting circle, infeed rollers, pressure bar, and outfeed rollers. To finish it off, he’ll clean and lubricate the machine.
Finally, Matt will tune up the hollow-chisel mortiser, setting the fence parallel to the chisel, making sure the bed is perpendicular to the fence, and ensuring that the chisel and tables move smoothly and accurately.
Videos in the Series
-
Ep 1: Machine Setup – Introduction
July 23, 2018
-
Ep 2: Machine Setup – The Tablesaw
July 23, 2018
-
Ep 3a: Machine Setup – The Jointer part 1
July 30, 2018
-
Ep 3b: Machine Setup – The Jointer part 2
July 30, 2018
-
Ep 4: Machine Setup – The Bandsaw
August 7, 2018
-
Ep 5: Machine Setup – The Hollow Chisel Mortiser
August 13, 2018
-
Ep 6: Machine Setup – The planer
August 20, 2018
Comments
I hope people actually take the time to learn how to tune their equipment. Well tuned machinery makes work safer, easier, accurate and more enjoyable!
Thanks Matt and Ellen for putting this together
Are the other episodes following later? Jointer, Bandsaw and Planer tune-ups? Thanks.
Yes. They'll be coming out one per week.
I get so many questions about machine setup. This will be a great centralized resource to refer people to.
This is really a great series. Thanks so much to Ben and Jeff for making these videos and of course to Matt and Ellen for the instruction. I'm so pleased with this new direction that FWW is taking, especially the content and caliber of the recent video work. Please keep it up.
I've referred to these videos often, and always find something I missed in my earlier viewings. Wonderful information, wonderful presenters. Keep them coming FWW!
Log in or create an account to post a comment.
Sign up Log in