Fine Woodworking

Video

Let’s talk about the end-grain glue joint video

September 16, 2021

Although the methods seem valid, the practical uses of this joint are probably few and far between.
STL249: MDF on a jointer?

September 10, 2021

Bob Van Dyke joins Mike and Ben to discuss story sticks, cooling glue to get more open time, and spring joints. And he admits to milling MDF on his machines!
Shop Class: Offset Turning with Beth Ireland

September 9, 2021

Replay! Join renowned turner and beloved teacher Beth Ireland for this webinar as she demystifies offset turning.
STL248: Best of Shop Talk Live #1

August 27, 2021

From STL179 Question 1: From Tony: We hear so much talk about Lie Nielsen, Veritas, and Stanley hand planes but, I have a Millers Falls No. 8 that i picked…
Sponsored Content
Webinar: PantoRouter – Advanced Joinery and Unconventional Applications

August 20, 2021

Replay Join PantoRouter's Mac Sheldon and John Henry Souza for a live, in-depth look at how woodworkers all across the globe are using the PantoRouter in new creative ways.
STL Profile: Erika Torres

August 20, 2021

Erika Torres tells us about her woodworking journey—from high school shop class to studying with Gary Rogowski–and why she's committed to woodworking for the long haul.
Block plane meets the lathe

August 18, 2021

After using gouges to take square stock close to its finished form, Mario Rodriguez often relies on a block plane to achieve a smooth taper when turning.
STL247: Drop the baseline

August 13, 2021

Mike and Ben discuss getting rid of marking gauge lines on dovetails, how long their blades last, more apron and pencil preferences, and why Mike has a day job.
How to prevent brad-nail blowouts

August 11, 2021

Nobody wants a brad sticking out of their drawer side. Here's how to make sure that doesn't happen.
Webinar: Bandsaw Jigs and Fixtures with Michael Fortune

August 9, 2021

Replay! Join contributing editor Michael Fortune for a fascinating look into how he gets the most from his bandsaws.

No results found.